-
A wafer ball valve usually fits a tight piping layout better because its body is shorter and lighter than a conventional flanged ball valve. This saves axial space, but the shorter valve may still be difficult to use if there is little room for through-bolts, flange separation, the handle or the actuator. Compare the complete installation and maintenance envelope, not face-to-face length alone. &n...
View More
-
Pressure at the bleed port after a double block and bleed (DBB) valve is closed does not automatically mean failure. A short release that falls to zero is normally trapped cavity pressure. Pressure that remains, flows continuously or rebuilds can indicate a passing seat, restricted bleed, thermal expansion, disposal-system backpressure or an incorrect line-up. The trend matters more than one gauge...
View More
-
An integrated double block and bleed (DBB) valve is usually easier to install than an arrangement of two block valves and one bleed valve assembled separately. It occupies less line space, needs fewer field connections and normally requires less pipe support. Maintenance is a closer contest. Three separate valves take more work to install, but each component can be repaired or replaced without tre...
View More
-
WRAS Approval Is Not Just a Catalogue Label For drinking water projects in the UK, a ball valve should not be treated as suitable just because it looks like a standard plumbing or industrial valve. Any fitting in contact with potable water needs to meet the relevant water fittings regulations, and WRAS approval is one recognised route buyers use to verify that compliance. WRAS approval is e...
View More
-
Ball valves are widely used in oil & gas, chemical processing, power generation, LNG, and water treatment systems because of their reliable shutoff performance. However, valve leakage remains one of the most common maintenance issues encountered in industrial facilities. When a ball valve starts leaking, operators often ask the same question: is the valve seat damaged, or has the sealing ring ...
View More
-
A ball valve is a widely used fluid control valve in industrial applications. A ball valve with a balance hole is a special design that offers distinct functional characteristics and is suitable for specific operating conditions. This article provides a comprehensive introduction to ball valves equipped with balance holes. 1. Structure of Ball Valves with Balance Holes Compared with standar...
View More
-
Both V-port ball valves and O-port ball valves are important types of ball valves, with clear differences in design, applicable media, and control performance. Understanding these differences helps engineers make more appropriate selections for specific applications. Design and Characteristics of V-Port Ball Valves V-port ball valves feature a distinctive partial-sphere ball design w...
View More
-
In industrial piping systems, ball valves and globe valves are two of the most commonly used control components. Both are capable of regulating and shutting off fluid flow, yet they differ significantly in structure, working principle, and application scope. If you have ever hesitated between choosing a ball valve or a globe valve while designing or maintaining a fluid system, this a...
View More
-
When you turn on your tap or run a washing machine, have you ever wondered what device quietly controls the water flow?Chances are, it's a small but essential component - the ball valve. A ball valve controls flow by rotating a handle 90 degrees to open or close a hole through the center of a spherical disc. When aligned with the pipeline, the medium (water, oil, or gas) flows freely; when ...
View More
-
In industrial settings, quickly and accurately determining whether a ball valve is open or closed is a fundamental yet critical skill. Misjudgment can lead to production stoppages, fluid leaks, or even safety incidents. Fortunately, the design of ball valves provides several intuitive indicators. 1. The Most Direct Method: Observing the Handle Position For the most commonly used hand...
View More
