In industrial piping systems, ball valves and globe valves are two of the most commonly used control components. Both are capable of regulating and shutting off fluid flow, yet they differ significantly in structure, working principle, and application scope.

If you have ever hesitated between choosing a ball valve or a globe valve while designing or maintaining a fluid system, this article will help you make a clearer and more informed decision.

Structure and Working Principle

The core component of a ball valve is a spherical disc with a through hole. By rotating the ball 90 degrees, the flow can be quickly started or stopped. Its structure is relatively simple, and the straight-through flow path results in very low flow resistance.

A globe valve, on the other hand, uses a disc that moves up and down along the axis of the valve seat. By rotating the stem, the disc gradually presses against or lifts away from the seat, thereby controlling the flow rate.

In short:

● A ball valve is a rotary-type valve that enables fast opening and closing.

● A globe valve is a linear-motion valve that provides more precise flow regulation.

Flow Characteristics and Control Performance

When it comes to fluid control, the differences between the two valves are quite distinct.

A ball valve allows fluid to pass almost straight through without changing direction. The internal flow path is linear, resulting in very low flow resistance. This makes it ideal for applications that require quick opening and closing, such as emergency shut-off or systems with frequent operation.

However, because a ball valve opens and closes almost instantaneously, it is not suitable for precise flow regulation. Doing so may cause wear on the sealing surfaces or lead to vibration issues.

A globe valve, in contrast, excels at precise flow control. Its disc can be positioned at any degree of opening, allowing operators to fine-tune both flow rate and pressure. The drawback is its more complex structure and the fact that the fluid must change direction as it passes through the valve—resulting in higher pressure drop and flow resistance.

In summary:

● Ball Valve: Low flow resistance, fast operation, not suitable for throttling.

● Globe Valve: Precise flow control, higher flow resistance, slower operation.

Sealing Performance and Maintenance

A ball valve typically uses a soft-sealing structure, such as PTFE, which provides excellent tightness and allows for zero leakage. This makes it widely used in applications involving gas, steam, and liquids where a reliable seal is essential.

When equipped with a metal-seated design, the ball valve can also withstand high-temperature and high-pressure conditions.

In terms of maintenance, its compact structure and few components make disassembly and reassembly very convenient.

A globe valve, on the other hand, usually features metal-to-metal sealing surfaces, which can handle higher temperatures and pressures. However, with frequent operation, these sealing surfaces are prone to wear.

During routine maintenance, it is important to inspect the disc and seat regularly for signs of abrasion or damage.

Comparison of Application Scenarios

Ball valves are widely used in fluid transmission systems for the oil & gas, chemical, and pharmaceutical industries. They are particularly suitable for applications that require rapid on/off operation, low pressure drop, and tight sealing, such as emergency shut-off systems, gas lines, and liquid transfer pipelines.

Globe valves are more commonly used in steam systems, cooling-water systems, and other process lines that require precise flow control and pressure regulation, and they perform reliably in high-temperature, high-pressure environments.

In short:

● If your system priorities are fast actuation and low flow resistance, choose a ball valve. 

● If you prioritize control accuracy and high-temperature/high-pressure tolerance, a globe valve is the better option.

Service Life and Operating Torque

Ball valves require only a 90° turn to open or close, resulting in low operating torque and long service life. They are particularly well-suited for automated control systems.

Globe valves have a longer stroke and require greater operating force, but their robust structure allows them to withstand frequent flow regulation and control operations.

Conclusion

When choosing between a ball valve and a globe valve, it is essential to consider the specific operating conditions—such as fluid properties, temperature, pressure, and operation frequency.

Ball valves are renowned for their low flow resistance and quick on/off operation, while globe valves play a crucial role in industrial systems due to their precise flow control and high-pressure capability.

Making the right valve choice not only affects system efficiency but also has a significant impact on long-term maintenance costs and safety.

Q&A (Frequently Asked Questions)

Q1: Can a ball valve be used to regulate flow?

A: It is not recommended. Ball valves are primarily designed for on/off control. Keeping them partially open for extended periods may cause seal damage or vibration.

Q2: Can a globe valve completely shut off the fluid?

A: Yes. When closed, the globe valve disc presses tightly against the seat, providing good sealing. However, it does not achieve the zero-leakage level of a soft-seated ball valve.

Q3: Which valve is more suitable for high-temperature applications?

A: Globe valves are generally better for high-temperature and high-pressure conditions because they often use metal-to-metal seals. Ball valves with soft seals may degrade at elevated temperatures.

Q4: Which valve is recommended for automated systems?

A: Ball valves are recommended. Their 90° rotation design allows easy operation with low torque, making them well-suited for integration with electric or pneumatic actuators.