English

English

Get a Quote
Products

Hot Products

Company News

Advantages of V-port Valves
Advantages of V-port Valves
2020-09-18

The V-ball valves or V-port ball valves are similar to traditional ball in which there is a V-notch on a ball-shaped disc to control flow by a rotating quarter-turn motion. The “V-port" is a particular design that bring about precise flow and the ability to regulate and control flow by V balls of  different degrees. These special valves are used in a wide range of chemical applications, including the most challenging services with many advantages.   Flow Modulating The accuracy of V-ball valves provides equal percentage flow characteristics. As the ball rotates, desired flow rates can be achieved by positioning the ball anywhere between 0° and 90°.   Bubble tight shutoff V-ball valves have the ability to close tightly. Therefore, no other shutoff valves is required when using a V-ball valve on a globe valve.   Lower pressure drop V-ball valves also have a higher coefficient of flow (Cv) than the same size globe valve, which directs the flow and uses a plug to control the flow through the valve. This means that the flow rate achieved by one shut-off valve can be achieved with a smaller V-ball size.   Higher shutoff pressure. A 90°rotation of the ball allows the V-ball to close at a higher operating pressure. This therefore allows the use of lower torque actuators, resulting in cost savings and increased efficiency for the end user.

Know and Know More About Changeover Valve
Know and Know More About Changeover Valve
2020-09-11

There are quite a few types of changeover valves, and according to different standards, there are different subdivisions. But in general, it is mainly four kinds, for motorized changeover valve, manual changeover valve, solenoid valve and electro-hydraulic changeover valve.   1. What is a changeover valve?   Changeover valve, from a professional point of view, is a kind of direction-change valve. It is mainly used to achieve the flow of hydraulic oil, cut off the machine changeover operations, pressure relieving, as well as sequential action control, so its use is very wide.   2. The working principle of reversing valve   The changeover valve uses a  driving mechanism outside the valve to rotate the drive shaft, and then activates the valve plate, etc. So that the fluid can flow into the outlet of the lower part of the valve, and can be changed from time to time to achieve the purpose of periodically changing the flow direction.   3. Changeover valve classification  (1) Motorized changeover valve, it is also known as a stroke valve.    (2) Electromagnetic changeover valve, electromagnetic changeover valve is the use of electromagnetic attraction to manipulate the spool changeover control valve.    (3) Electro-hydraulic changeover valve, electro-hydraulic changeover valve is a composite valve composed of solenoid valve and hydraulic changeover valve.    (4) Manual changeover valve, manual changeover valve is a changeover control valve with a manual lever to manipulate the spool shift direction-changing valve.  

How to extend the service life of lined valves?
How to extend the service life of lined valves?
2020-09-01

Among the anti-corrosion materials, PTFE has incomparable excellent performance. In addition to outstanding chemical stability, it also has satisfactory anti-fouling and anti-stickiness, small dynamic and static friction coefficient, good anti-wear performance. Using it as a valve opening and closing the sealing material, the friction between the sealing surface and required operating torque will be reduced, hence product life increases. the application scope can also be extended to the food, pharmaceutical industry and so on. Fluorine lined valves, also known as anti-corrosion valves, are usually found in harsh working conditions. The media is either toxic and harmful chemicals, or pretty corrosive acids and bases or organic solvents. That means improper use and operation will elicit significant economic losses and serious consequences. Applicable media: various concentrations of acid and alkali salt and certain organic solvents. Fluorine is extolled as the world's most ideal anti-corrosion materials, has been widely used in the rotational molding of large equipment and piping lining. Correct use and maintenance of the valve can extend the service life of fluorine lined valves, then what can be done to effectively protect it? 1. Carefully read the instruction manual before use. 2. Use it within the range of pressure, temperature and media given by the nameplate or instruction. 3. To prevent fluorine lined valves from excessive piping stresses due to temperature changes, temperature changes should be minimized and U-shaped expansion joints should be added before and after the valve. 4. For some unstable and easily decomposed media (such media will expand after decomposition,  resulting in an abnormal pressure rise) and media that can cause valve damage or leakage, measures should be taken to eliminate or limit the factors that cause the decomposition of unstable media. 5. For fluorine lined valves in pipelines of toxic, flammable, explosive, highly corrosive media, it is strictly prohibited to replace the packing under pressure. Even the valves are designed with sealing part, it is not recommended to replace the packing under pressure either. 6. For pipelines with self-combustible media, measures should be taken to ensure that the ambient and working temperatures do not exceed the self-combustibility point of the media to avoid the danger from sunlight or external fires.

Trunnion Mounted Ball Valve
加载中...

Trunnion Mounted DN300 PN63 DBB Ball Valve

  • Payment:

    30% T/T When Order, 70% T/T Before Shipment
  • Product Origin:

    China
  • Lead Time:

    30~60 days Ex Works after order confirmation
  • Material:

    LF2
  • Method of Operation:

    gearbox
Inquiry now
Product Detail

Trunnion mounted ball valve DN300 PN63 full bore Double Block and Bleed PMSS seal(metal seal+soft seal)blowout proof stem gearbox operation with LF2 body, LF2+ENP ball/seat and 410 stem.


Quick Detail

Type

Ball Valve

Size

DN300

Design Pressure

PN63

Construction

DBB,Trunnion mounted ball valve

ConnectionType

Flange

OperationType

Gearbox Operated

Body Material

LF2

Ball Material

LF2+ENP

Stem Material

410

Seat Material

LF2 +ENP

Design Code

API 6D

Face to Face Dimension

API 6D

End Connection

ASME B16.5

Pressure & Temp

ASME B16.34

Medium

Water, Oil and Gas

Origin

China

LF2 DBB Trunnion mounted ball valve

LF2 gearbox ball valve

Blowout proof stem ball valve

Blowout proof stem ball valve

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products
Trunnion Type Ball Valve Flanged Gearbox
Forged Steel Trunnion Mounted Ball Valve 12 Inch 600LB

The 12 inch 600LB trunnion mounted ball valve has gearbox, RTJ flange, fire safe design per API 607. The 3 piece ball valve is designed per API 6D. Design Feature & Benefit 1.Small flow resistance means less pressure drop 2.Simple valve structure and light weight 3.Diversified sealing material available, from metal material TCC, satellite, stainless steel to soft material PTFE, Teflon, Nylon, Peek and etc 4.Good performance of both metallic sealing and soft sealing 5.Convenient and swift operation of the valve 6.Easy to maintain due to renewable seat ring 7.When fully opened or closed, the valve sealing face is isolated from medium corrosion.   8.Wide range of application in terms of size and pressure rating Quick Detail  Type Ball Valve Size 12" Pressure Class 600 Construction Trunnion Mounted Ball, Three-Piece Type, Side Entry Connection RF Flange Operation Gear Operated Body Material ASTM A105 Design & Manufacture API 6D Pressure & Temp ASME B16.34 Face to Face ASME B16.10 End Connection ASME B16.5 Test & Inspection Code API 598 Fire Safe API 607 Temperature Range -29℃~+200℃ Medium Water, Oil and Gas Origin China Material Specification No Part Name  Carbon steel to ASTM  Stainless Steel to ASTM WCB  LCB CF8 CF8M CF3 CF3M 1 Underplate WCB  LCB CF8 CF8M CF3 CF3M 2 Underplate Bolt A193 B7 A320 L7 A193 B8 3 Trunnion A182 F6 A182 F6 A182 F304 A182 F316 A182 F304L A182 F316L 4 Body  A216 WCB A352 LCB A351 CF8 A351 CF8M A351 CF3 A351 CF3M 5 Bonnet Nut A194 2H A194 4 A194 8 6 Bonnet Bolt A193 B7 A320 L7 A193 B8 7 Cap A216 WCB A352 LCB A351 CF8 A351 CF8M A351 CF3 A351 CF3M 8 Gasket SS Spiral Wound/graphite or SS Spiral Wound/PTFE 9 Shaft Sleeve SS/graphite 10 Seat Ring RPTFE or POM 11 Ball A105/Ep.Cr or F6 A182 F6 A351 CF8 A351 CF8M A351 CF3 A351 CF3M 12 Seat A105/Ep.Cr or F6 A182 F6 A182 F304 A182 F316 A182 F304L A182 F316L 13 Spring 17-17PH(inconel for NACE)Ni-cr Alloy 14 O-Ring Viton 15 Stem A182 F6 A182 F6 A182 F304 A182 F316 A182 F304L A182 F316L 16 Sealing Cover A182 F6 A182 F6 A182 F304 A182 F316 A182 F304L A182 F316L 17 O-Ring Viton 18 Gear Actuator   The material is according to ASTM standard Related Knowledge What is difference between floating and trunnion ball valve? The ball part of floating ball valve is movable. Under the pressure of medium, the ball has a certain displacement and presses on the sealing surface of outlet end to ensure its tight sealing. The floating structure is suitable for ball valve with small size and low & medium pressure rating. The ball part of trunnion mounted ball valve is fixed. Under the medium pressure, the floating seat will move towards the ball to ensure the sealing. The trunnion mounted ball valve is often with larger size and higher pressure.

API 6D Trunnion Mounted Ball Valve
Cast Steel Trunnion Ball Valve 24 Inch 300LB API 6D

The Class 300 flanged ball valve has cast steel WCB body, stainless steel ball, stem, seat ring along with Devlon seat insert. We also supply more types of trunnion mounted ball valve, accept customized. Design Feature 1.Firesafe design as per API 607 2.With sealant injection for self lubricating 3.With antistatic design 4.With anti-blowout stem 5.With vent and drain port 6.Full bore design 7.Three-piece type and trunnion ball 8.Gear operated for easy operation Quick Detail Type Ball Valve Size 24" Pressure ANSI 300 Construction Trunnion Type Ball, 3-Piece Body, Side Entry, Full Bore Connection Flange Connection Operation Gearbox Operation Body Material ASTM A216 WCB Design Code API 6D Pressure & Temp Code ASME B16.34 Face to Face ASME B16.10 End Connection ASME B16.5 Test & Inspection Code API 598, API 6D Fire Safe API 607 Temperature Range -29℃~+200℃ Medium WOG Origin China Dimension CLASS 300 DN mm 50 65 80 100 150 200 250 300 350 400 450 500 600 700 NPS in 2 2.5 3 4 6 8 10 12 14 16 18 20 24 28 L (RF) mm 216 241 283 305 403 502 568 648 762 838 914 991 1143 1346 in 8.5 9.5 11.13 12 15.88 19.75 22.38 25.5 30 33 36 39 45 53 L1 (BW) mm 216 241 283 305 457 521 559 635 762 838 914 991 1143 1346 in 8.5 9.5 11.13 12 18 20.5 22 25 30 33 36 39 45 53 L2 (RTJ) mm 232 257 298 321 419 518 584 664 778 854 930 1010 1165 1372 in 9.13 10.13 11.75 12.63 16.5 20.38 23 26.13 30.63 33.63 36.63 39.75 45.89 54 H mm 153 165 195 213 272 342 495 580 625 720 790 840 1050 1150 in 6.02 6.5 7.68 8.39 10.7 13.5 19.5 22.85 24.6 28.35 31 33.1 41.34 45.3 Do(W) mm 400 400 600 850 1100 1500 *350 *350 *600 *600 *800 *800 *800 *800 in 15.74 15.74 23.62 33.46 43.3 59 13.8 13.8 23.6 23.6 31.5 31.5 31.5 31.5 RF(Kg)   18 27 47 80 118 200 365 530 740 1030 1320 1540 2600 3900 BW(Kg)   14 2 38 65 105 185 342 503 713 1000 1285 1498 2540 3825 *Worm Gear or Electric Actuator Operated Dervos Quality Checking System In Dervos, we control quality throughout the whole manufacturing process. Casting inspection: Though casting inspection, we can find out the problem of raw material, such as shoddy casting, unqualified wall thickness, chemical composition and so on, which ensure that you will not be cheated.   Machining Inspection: On the one hand, we could ensure machining accuracy through this process. On the other hand, we can find out machining mistake as early as possible, to win more time for repairing and remaking  Final Inspection:  Final inspection activities include document and QC record review, visual examination, dimension check, pressure test, painting and packing check. You don’t need to come and inspect in person and all the documents could be provided as proof.

Trunnion Mounted Ball Valve
API 6D Trunnion Ball Valve 8 Inch Class 300 WCB Gearbox

API 6D ball valve is designed with trunnion mounted ball and full bore structure. The flanged ball valve has 300LB design pressure and 8 inch nominal size with gearbox operation mode, conforming to NACE MR0175 requirement. Quick Detail Type Ball Valve Size 8” Pressure 300LB Construction Two-Piece Body, Full Bore, Trunnion Ball Connection RF Flange Operation Mode Gearbox Body Material A216 WCB Trim Material Ball/Stem F6a, Seat RPTFE Design & Manufacture API 6D Pressure & Temp Code ASME B16.34 End to End ASME B16.10 End Connection ASME B16.5 Inspection API 6D, API 598 Temperature Range -29℃~+200℃ Medium Oil, Water, Gas Dervos Packing Painting Test & Report Pressure Testing & Dimension Checking

Forged Steel 3 Piece Trunnion mounted Ball Valve 600 LB API6D
Forged Steel 3 Piece Trunnion mounted Ball Valve 600 LB API6D

The API 6D ball valve is designed with trunnion mounted ball and full bore structure. The flanged ball valve has 600LB design pressure and 10 inch nominal size with gearbox operation mode, conforming to NACE MR0175 requirement.

3 piece ball valve gear operator A105 4 inch 150LB
3 piece ball valve gear operator A105 4 inch 150LB

The 4 inch 150LB ball valve is a 3-piece one with reduced port, A105 body, F6A stem, ball and seat. The The valve is made as per API6D and is tested under API 598.

150LB V ball valve Duplex Stainless Steel 4A
150LB V ball valve Duplex Stainless Steel 4A

The 150LB ball valve, made of Duplex stainless steel 4A, has a special V port ball. The valve is particularly suitable for media containing fibers, tiny solid particles, slurry and so on. 

Bellow Seal Globe Valve PN40
Cast Steel Bellow Seal Globe Valve DN65 PN40 1.0619

Dervos bellow seal globe valve is designed as per EN13709 with face to face dimesnsion per EN558. The special designed bellow seal make sure zero leakage from stem. Quick Detail Type Globe Valve Norminal Size DN 65 NorminalPressure PN 40 Construction Bolted Bonnet, Rising Stem, Bellow Sealed ConnectionType RF Flange Operation Handwheel Design Code EN13709 Face to Face EN 558 Connection EN1092 Test & Inspection EN12266 Body Material Carbon Steel 1.0619 Bellow Material SS304, SS316, SS316L and etc ApplicableTemp -29℃~+420℃ Application Water, Oil, Gas Structure Feature 1. Standard design of double-wall bellow seal 2. Heat-dissipating bonnet design; 3. With lubricant storage device; 4, With design of circlip to fix stem nut; 5. Reasonable product structure, reliable sealing performance and good appearance; 6. The sealing surface is welded with Co-based hard alloy, which has good wear resistance, corrosion resistance, anti-friction performance and long service life; 7. Stem has nitriding treatment with good corrosion resistance and anti-friction performance; 8. With position indicator for stem movement;

Through Conduit Gate Valve
Through Conduit Expanding Gate Valve 18 Inch 600LB API6D

The API 6D through conduit gate valve is designed with double expanding wedges, metal to metal seat and diversion hole for pigging. The valve has good performance on sealing, less flow resistance and is suitable for application with some solids or particles. Quick Detail   Type Gate Valve Size 18'' Design Pressure ANSI 600 Construction Double Expanding Wedges, Fully Metal Seat, With Diversion Hole ConnectionType RTJ Flange OperationType Gearbox Operated Body Material WCB WedgeMaterial A105+STL+ENP StemMaterial 17-4PH SeatMaterial A105+STL+ENP Design Code API 6D Face to Face Dimension ASME B16.10 End Connection ASME B16.5 Pressure & Temp ASME B16.34 Medium Water, Oil and Gas Origin China

Double Eccentric Butterfly Valve
Double Offset Cast Iron Butterfly Valve EN593 PN10 DN500

The cast iron butterfly valve belongs to double offset type. It owns a compact body, low torque value, and perfect sealing function, suited for water application with normal temperature range. Quick Detail Type Butterfly Valve Nominal Size DN500 Nominal Pressure PN10 Structure Double Offset, Soft Seated Connection Type Flange Type Operation Gear Operated Design Code EN 593 Face to Face EN 558 End Connection EN 1092 Test & Inspection EN 12266 Body Material Cast Iron GGG50 Temperature Range -15℃~+150℃ Application Water, Oil, Gas Dimension Checking & Pressure Testing Tag & Packing

SS High Performance Butterfly Valve
Double Offset High Performance Butterfly Valve CF8M 3 Inch

The double offset high performance butterfly valve, with lever operation and lug body, is designed per API 609. The CF8M body and PTFE seat butterfly valve is more durable in serving the application. Quick Detail Type Butterfly Valve Size 3'' Design Pressure 150LB Construction Double Eccnetric, Soft Seat Connection Type Lug Operation Wrench Operated Design Code API 609 Face to Face ASMEB16.10 End Connection ASMEB16.5 Test & Inspection API 598 Body Material Stainless Steel CF8M Temperature Range -29℃~+150℃ Application Water, Oil, Gas Dimension Class 150 DN mm 40 50 65 80 100 125 150 200 250 300 350 400 NPS in 1 1/2 2 2 1/2 3 4 5 6 8 10 12 14 16 L mm       127 127 127 127 152 203.2 203.2 203.2 203.2 in       5 5 5 5 6 8 8 8 8 L1 mm 38.1 46 50.8 48 54 63.5 57 63.5 71.5 81 92 101.5 in 1.5 1.81 2 1.88 2.13 2.5 2.25 2.5 2.81 3.19 3.62 4 H mm 185 190 220 229 239 252 284 307 337 392 435 481 in 7328 7.48 8.7 9 9.4 9.9 11.2 12 13.3 15.4 17.1 19 D(W) mm 160 160 160 160 160 160 160 200 200 250 250 300 in 6.3 6.3 6.3 6.3 6.3 6.3 6.3 7.9 7.9 9.8 9.8 11.8 Weight  (Kg) mm       12.5 13.5 17 38 72 105 148 182 230 in 8 9 10 10 11 14.5 34.2 66 98 134 168 200 Related Knowledge What is a high performance butterfly valve? A high performance butterfly valve is often designed with double offset and PTFE seat, to handle everything from general applications to viscous and corrosive liquids; corrosive gases and steam. Compared to concentric resilient seat butterfly valve, the disc of the high performance butterfly valve is arranged and positioned off the center of the pipe bore, which could reduce wear and tear to the valve during operation and increase sealing performance. In conlusion, high performance butterfly valve is applicable for higher pressure and temperature applications. Meanwhile, it has longer cycle life and better sealing ability.

Stainless Steel CF8 Check Valve
Stainless Steel Non Slam Swing Check Valve 8 Inch 150L

The stainless steel CF8 non return valve features in non slam type disc, ANSI 150 flange end, and full port design.  Quick Detail Type Non Return Valve ( Check Valve) Size 8'' DesignPressure Class 150 Construction Non Slam Type Connection RF Flange Design & Manufacture ASME B16.34 End to End ASME B16.10 Connection ASME B16.5 Pressure & Temp ASME B16.34 Test & Inspection API 598 Body Material A351 CF8 Trim Material SS304 Media W.O.G. Available Modifications for Dervos Valves -Valve Pressure -Valve Size -Reduced Bore & Full Bore -Body & Trim Material (Disc, Seat, Pin, Spring) -End Connection (Flange, BW, SW, Thread, Wafer, Lug) -Available Operation (Bare Stem, With Actuators) -Available Counterweight -Available Cylinder -Customizing Coating -Customizing Packaging Related Knowledge What is non-slam check valve? Water hammer is a hydraulic phenomenon that undergoes an abrupt change in its rate of flow and are caused by sudden shutting or slamming. Water hammer will reduce process efficiency, cause valve damage, gasket joint leaks and other problems. The non-slam check valve is designed to reduce water hammer. An internal spring can prevent the disc from slamming close.The design of a non-slam check valve could eliminate pressure flutuations, vibration and damges. Plus, the disc and spring experience minimal wear over time, which will largely extend the service lives of non-slam check compared to swing check valve.

Leave a message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact