A steam trap valve is a device designed on devices that require steam, which can automatically discharge condensate, air, and non condensable gases from the steam system and prevent steam from being discharged. Important Functions (1) Able to quickly remove condensate generated; (2) Prevent steam leakage; (3) Remove air and other non condensable gases. The necessity of using steam equipment to remove condensate and air: (1) Prevent water hammer: If there is condensate in the steam pipeline, it will be strongly impacted by the high-speed flowing steam on the pipe wall, valves, and steam equipment, causing damage or damage to the pipeline bends, valves, and steam equipment. (2) To prevent a decrease in the efficiency of steam using equipment: Steam using equipment (especially indirect heating devices) is aimed at effectively utilizing the latent heat of steam. Excessive condensate trapped in these devices comes into contact with the heating surface, reducing the heating area and uneven heating up and down, resulting in a significant decrease in equipment efficiency. (3) Prevent corrosion of steam inside equipment: Oxygen in water and air coming into contact with the equipment can cause chemical reactions, leading to rust corrosion. (4) Prevent damage to steam using equipment: Due to the different temperatures of steam and water, the condensed water inside the equipment generates temperature differences locally, causing temperature difference stress and equipment damage. Specific requirements for steam trap valves: (1) No steam leakage during the discharge of condensate; (2) It can eliminate all condensed water from any part of the steam system; (3) Capable of simultaneously discharging air and condensate; (4) Suitable for a wide range of pressures; (5) Easy to repair and maintain: simple structure with few moving parts; (6) High practicality: small size, light weight, long lifespan, low price, and no loss of emission capacity due to air and steam.
In industrial production, high-pressure ball valves play a crucial role, and damage to the sealing surface may lead to leakage and performance degradation. Therefore, measures must be taken to prevent and protect the sealing surface. 1. Proper Operation and Usage When operating high-pressure ball valves, it is essential to follow the correct operating procedures and technical requirements. Do not exceed the rated pressure and temperature range of the valve. Avoid over-tightening the valve to prevent damage to the sealing surface or premature wear. 2. Regular Inspection and Maintenance Regularly inspect the sealing surface of the ball valve, especially valves exposed to high-pressure and high-temperature environments. Remove any debris and dirt around the valve to ensure the sealing surface is in good working condition. 3. Select Appropriate Sealing Materials Choose suitable sealing materials according to the requirements of the working environment. For instance, in high-temperature or chemically corrosive environments, select sealing materials that are resistant to high temperatures and corrosion. Regularly inspect the wear and aging of sealing materials and promptly replace damaged seals. 4. Preventing Foreign Object Intrusion Install filters or screens to prevent foreign objects from entering the valve body and damaging the sealing surface. Avoid conducting messy operations around high-pressure ball valves to reduce the intrusion of external impurities. 5. Timely Repair and Replacement If damage or wear is found on the sealing surface, stop using it immediately and proceed with repairing or replacing the seals to prevent leaks from causing more serious issues. 6. Training and Education Provide training to operators to ensure they understand the working principles and proper operation methods of high-pressure ball valves, reducing the risk of seal surface damage due to operational errors. 7. Minimize Frequent Opening and Closing Reduce the frequency of opening and closing high-pressure ball valves because frequent operation increases wear and fatigue on the sealing surface, leading to premature failure. Where possible, take measures to minimize valve cycling, such as planning production schedules rationally or employing automated control systems. 8. Regular Cleaning and Maintenance Perform regular cleaning and maintenance on high-pressure ball valves to remove accumulated dirt and deposits inside the valve body, ensuring the valve operates smoothly and the sealing surface remains clean. Regular cleaning effectively reduces contamination and corrosion of the sealing surface, extending the lifespan of the seals. 9. Choose High-Quality Ball Valves Select high-quality high-pressure ball valve products to ensure that the design and manufacturing quality of the valves meet standard requirements and possess excellent performance and reliable sealing capabilities. Valves from DERVOS typically offer longer lifespan and better sealing effects, effectively...
Stainless steel trunnion mounted ball valve is a commonly used valve type, usually used to control the flow of fluids (such as water, gas, steam, etc.) in pipelines. Advantages: 1. High-pressure resistance. 2. Corrosion resistance due to stainless steel material. 3. Excellent sealing performance with advanced sealing technology. 4. Using PEEK valve seats, zero leakage, and light torque. 5. Robust structure for high reliability. 6. Convenient operation, including remote control, enhancing system efficiency. 7. Wide applicability across industries such as petroleum, chemical, natural gas, and metallurgy. Stainless steel trunnion mounted ball valve is a reliable valve type suitable for various industrial scenarios, especially in environments that require corrosion resistance and high temperature resistance accompanied by corrosion.
With outside screw and yoke, handwheel operation, NPT, the forged steel globe valve is made of A105 and designed as per BS5352.
Payment:
30% when order confirmed, 70% before shipmentProduct Origin:
ChinaColor:
CustomizationShipping Port:
Shanghai, ChinaLead Time:
30~60 days Ex Works after order confirmationMaterial:
A105+STLQuick Detail
|
Type |
Globe Valve |
|
Nominal Diameter |
DN15 |
|
Nominal Pressure |
ASA2500 |
|
Construction |
Body Bonnet;Reduced Bore; Outside Screw&Yoke |
|
Connection |
NPT Female Thread |
|
Operation |
Handwheel Operated |
|
Design & Manufacture |
BS5352 |
|
Socket weld ends dimensions |
ANSI B1.20.1 |
|
Screw End Dimension |
ASME/ANSI B1.20.14 |
|
Test & Inspection |
API 598 |
|
Temperature Range |
≤450℃ |
|
Body Material |
A105+STL |
|
Trim Material |
F6a+STL |
|
Disc Material |
A276-420+STL |
|
Media |
W.O.G. etc. |
Design Feature
1. Handwheel for ease of operation;
2. Reduced bore design for high flow and low pressure drop (full bore optional);
3. Bolted bonnet made from high quality forging, metal to metal surface contact for automatic gasket compression control and elimination of joint over-stressing;
4. Graphite packing - rings with built in corrosion inhibitor for leak tight sealing at high and low pressures and temperatures.
Q&A:
1. Can the orders always be delivered on time?
Our purchasing team follows up very closely with each order to make sure on-time delivery for most of orders. In 2018, more than 90% orders were delivered on time, and we are dedicated to doing better.
2. What’s the normal delivery lead time?
For normal material, usually the delivery time is about 35~40 days, and for forged material, the delivery can even be shortened to 20~25 days. We believe the short lead time can make our offer more competitive and help you secure more orders.
3. Do you have different price levels for us?
With our numerous suppliers, different price levels are available with us, so we are able to help you win more customer from different markets requesting for high, medium and low prices.
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
The 1 inch 800LB female threaded globe valve has plug disc, reduced port and manual handwheel operation. The valve is made of A105N body and trim 5 as per API 602. Quick Detail Type Globe Valve Size 1'' Pressure Class 800 Construction Bolted Bonnet, Reduced Port, Outside Scew & Yoke ConnectionType NPT Female Thread OperationType Handwheel Operated Design Code API 602 End to End Dimension ASME B16.10 Connection ASME B1.20.1 Pressure & Temp ASME B16.34 Test & Inspection API 598 Body Material Forged Steel A105 TrimMaterial 13CR+Stellite Temperature Range -29℃~+427℃ Application Water, Oil, Gas Origin China Product Range 1.Size up to 4 inch 2.Design pressure between 150LB to 2500LB 3.Connection: flange, socket weld, thread 4.Operation: handwheel, gearbox, bare stem, with actuators 5.Body material: carbon steel, stainless steel, alloy steel 6.Trim material: trim 1, 5, 8, 10, 12, 16 and ect. 7.Bolted bonnet, pressure sealed bonnet, welded bonnet, screwed bonnet 8.Reduced bore, full bore Inspection Reports Along with each order, Dervos will provide inspection reports and material test reports free of charge after shipment. All these certificates will let you have a clear picture of inspection process and results. Plus, these reports can be used for traceability.
Quick Detail Type Globe Valve DN DN50 PN PN250 Construction Tee Pattern; Bolt Bonnet; Connection Type NPT Operation Type Handwheel Design Code API602 Screw End ASME/ANSI B1.20.1 Test & Inspection API598 Body Material A105+STL Trim Material A276-420 Medium Water, Oil and Gas Origin China Features -- Globe valves have both good throttling and shutoff capabilities -- Easy to maintain and resurface the seats -- Can be used as a stop-check valve if the disc is not attached to the stem Technical Drawing Dimension Check Witnessing Tests Dervos Packaging Good packing means good first impression. Just imagine how do you feel differently when seeing two boxes below? And you will know the reason why in Dervos we value packaging so much. In Dervos, we make sure- Every valve is clean and dry. -Clean the valve before packing -Add anti-rust oil -Add flange cover No damage to valves in delivery. -Fix the valve with iron wire -Separate the valve with soft material -Layer the valve with plywood -Strong box and clear shipping mark
11/2" 800LB globe valve is made according to API602 standard. The valve body is made of A105+STL. It has the structural characteristics of welded bonnet. Its connection mode is SW. And it has hand wheel operation mode.
3/4" 800LB globe valve is made according to API 602 standard. The valve body is made of A105N+ STL. It has the structural characteristics of plug, disc swivel plug, body seat and OS&Y. Its connection mode is SW+FNPT. And it has hand wheel operation mode.
1/2" 800LB globe valve is made according to API 602 standard. The valve body is made of ASTM A182 F316/F316L+STL. It has the structural characteristics of bolt cover, disc swivel plug, body seat and OS&Y. Its connection mode is SW. And it has hand wheel operation mode.
DN25 PN63 globe valve is made according to BS5352 standard. The valve body is made of A105N+SS304. It has the structural characteristics of bolt cover, straight through type. Its connection mode is EN1092-1 D. And it has hand wheel operation mode.
4" 150LB check valve is made according to BS1868 standard. The valve body is made of A216 WCB. It has the structural characteristics of swing type, bolted cover and replaceable valve seat. Its connection mode is RF.
10" 300LB ball valve is made according to API 6D standard. The valve body is made of ASTM A216 WCB. It has the structural characteristics of full bore, fixed ball, anti-fire, anti-static, and anti-flying valve stem design. Its connection mode is RF. And it has turbine operation mode.
The DN100 through conduit slate gate valve is made according to EN558.It is ideal for pipeline applications requiring pigging capability.
The single-disc check valve, made of CF8, has excellent resistance to corrosion. Designed in accordance with API594, the valve is of a WAFER type.
The cast steel globe valve is designed as per BS1873. With Body Bonnet, outside screw and yoke, handwheel, the 8 inch valve, the valve is suitable for common work condition.
The 3 way plug valve is made of WCB body and stainless steel trim as per API 599. The plug valve that could connect any two ports together is applicable for natural gas service, water, oil and so on. Quick Detail Type Plug Valve Size 4'' DesignPressure 150LB Construction Three Way Type Plug Valve ConnectionType Flange Connection Operation Lever/Wrench Design Code API 599 Face to Face ASME B16.10 End Connection ASME B16.5 Pressure & Temp ASME B16.34 Test & Inspection API 598 Body Material A216 WCB TemperatureRange -29℃~+425℃ Application WOG Related Knowledge What are types of plug valves? Lubricated Plug Valve The plug gets lubricated by injecting sealant through injection fitting. The lubricant make sure the smooth movement and prevent the corrosion of plug. Usually, the seat of lubricated plug valve is metal, thus they can withstand higher temperature, available in larger size and higher pressure. Non-Lubricated Plug Valve A non-metallic sleeve or liner is installed in the body cavity of the plug valve. This sleeve reduce the fricion beween plug and body. Meanwhile it prevents the corrosion of plug. Due to non-metallice sleeve, the non-lubricated plug valve cannot be used in high temperature condition. Multiway Plug Valve The multiway plug valve is used for diverting flow in transfer lines. The multiway plug valves we often see are 3 way plug valve or 4 way plug valve. Dervos Packaging Based on sufficient experience, we have developed complete packing specifications and procedures to ensure clear and safe transportation so that you can receive good and sound products. And this is also an important factor that we earn good reputation from our customers.
Copyright © 2015-2024 DERVOS VALVE CO.,LTD.All Rights Reserved Blog / Sitemap / XML / Privacy Policy
