-
The vacuum butterfly valve is a common pipeline control valve, mainly used for fluid control in vacuum pipelines. Mainly used in petrochemical industry, metallurgical machinery industry, nuclear industry vacuum valve, etc. Structural Characteristics 1. It is designed and manufactured by adopting a new structural form welded by centerline butterfly plate and short structural steel plate. 2. Compact...
View More
-
Direction When installing the butterfly valve, pay attention to the installation arrow on the valve body. If it is two-way pressure, it can achieve two-way sealing, and there is no installation direction. Water Inlet Configuration There are elbows and T-shaped pipes on the water inlet side of the butterfly valve, which cause the fluid to bend and distribute unevenly. When the fluid flows into the ...
View More
-
The commonly used wedge gate structures are divided into three types: elastic wedge, rigid wedge, and wedge type double gate. The sealing surfaces on both sides of the wedge gate have a certain inclination angle with the vertical centerline of the gate, which is called the wedge half angle. The size of the wedge half angle has a significant impact on the performance of the gate valve. When the ang...
View More
-
There are many types of valves, each with its own advantages and disadvantages. Below are the advantages and disadvantages of five major valves, including gate valves, butterfly valves, ball valves, globe valves, and plug valves. 1. Gate valve Gate valve refers to a valve where the closing element (gate) moves vertically along the channel axis. 1.1 Advantages ① Low fluid resistance, small torque r...
View More
-
Difference A safety valve is a special valve in which the opening and closing parts are in a normally closed state under external force. When the pressure of the medium in the equipment or pipeline increases beyond the specified value, the medium is discharged outside the system to prevent the pressure of the medium in the pipeline or equipment from exceeding the specified value. Safety valves bel...
View More
-
1. Selection instructions for gate valve In general, gate valves should be preferred. Gate valves are not only suitable for media such as steam and oil, but also for media containing granular solids and high viscosity, and are suitable for valves in venting and low vacuum systems. For media containing solid particles, the gate valve body should have one or two purge holes. For low-temperature medi...
View More
