-
Soft seal gate valves are usually used as industrial valves. The deformation compensation function is generated by the overall rubber coating of the gate, which achieves good sealing effect, overcomes the problems of poor sealing, water leakage and rust of general gate valves, saves installation space more effectively. Advantages of Soft Seal Gate Valve: (1) Low fluid resistance The medium c...
View More
-
The one-piece ball valve is a wide-ranging ball valve, which is a ball valve composed of an integral one-piece valve body connected with a small bore internal thread. It is commonly used in some high-pressure working conditions requiring quick opening and closing or working conditions of toxic media. The two-piece ball valve is fixed by the two-piece valve body, which is easier to disassemble than...
View More
-
After selecting a suitable valve, it is necessary to install, maintain and operate it correctly, so as to give full play to its efficiency. The quality of valve installation directly affects its use, so it must be paid attention to carefully. 1. Direction Many valves have directionality, such as globe valve, throttle valve, pressure relief valve, check valve, etc. If installed reversely, it will a...
View More
-
1. Hazards (1) Damage to the valve itself The strength of valve shell, bonnet and stem parts is generally designed according to the nominal pressure of the valve. In case of abnormal pressure rise, the opening pressure will be doubled, resulting in the service stress of relevant parts to be doubled. When the actual stress of the material exceeds the allowable stress, the high stress part wil...
View More
-
Soft seal and hard seal are judged according to the sealing material of the valve seat. Soft seal: one side of the sealing pair is made of metal material, and the other side is made of elastic non-metallic material. This seal has good sealing performance, but it is not resistant to high temperature and abrasion, and has poor mechanical property. Hard seal: both sides of the sealing pair ...
View More
-
The plug valve is a quick opening and closing valve. Plug valves are suitable for multi-channel structures, so one valve can obtain two, three or even four different flow channels. This can simplify the design of the pipeline system, reduce the amount of valves and connecting fittings. Plug valves can be divided into soft seal and hard seal structures according to different sealing materials. 1. L...
View More