The installation requirements of fully welded ball valves in underground pipelines are crucial, as the unique characteristics of the underground environment pose higher demands on the performance and safety of the valves. Proper installation not only ensures the normal operation of the valves but also prolongs their service life and enhances the safety and reliability of the pipeline system. The following are the specific requirements for installing fully welded ball valves in underground pipelines: 1. Selecting the appropriate valve type When installing fully welded ball valves in underground pipelines, it is necessary to choose the appropriate valve type based on the operating conditions and fluid characteristics of the pipeline system. Fully welded ball valves, with advantages such as simple structure and reliable sealing, are suitable for high-pressure, high-temperature, and corrosive fluid applications in pipeline systems. 2. Underground burial depth consideration When installing fully welded ball valves, it is imperative to consider the depth of underground burial. Typically, the burial depth of underground pipelines should comply with relevant standards and specifications to ensure the valves are positioned securely while facilitating maintenance and operation. 3. Corrosion protection measures The dampness of the underground environment and the presence of chemicals in the soil can lead to corrosion and damage to valves. Therefore, when installing fully welded ball valves, it is necessary to implement appropriate corrosion protection measures. This includes selecting valves manufactured from corrosion-resistant materials and applying corrosion-resistant coatings to the valves to extend their service life. 4. Sealing performance requirements Fully welded ball valves in underground pipeline systems must possess excellent sealing performance to prevent fluid leakage and contamination of groundwater sources. During installation, it is imperative to ensure that the valve's sealing components are intact and properly installed to ensure that the sealing performance meets design requirements. 5. Consideration of groundwater level fluctuations Fluctuations in groundwater levels may affect the operational status and safety of fully welded ball valves. When selecting installation locations, it is essential to consider the range of groundwater level fluctuations and implement corresponding waterproofing measures to prevent groundwater from affecting the valves. 6. Regular inspection and maintenance The underground environment has a significant impact on fully welded ball valves; therefore, regular inspection and maintenance of the valves are essential. Inspection tasks include assessing the sealing performance of the valves, checking the condition of moving parts, evaluating the effectiveness of corrosion protection measures, and promptly addressing any issues to ensure the safe operation of the valves. When installing fully welded ball valves in unde...
We are delighted to announce that our company is on the brink of a new beginning - the acquisition of a new office space. This marks a fresh start for our company's development, and we eagerly anticipate crafting a brighter future in this new environment. The selected location enjoys excellent geographic positioning, convenient transportation, and a pleasant environment. The choice of our new office space has been meticulously considered, aiming to provide our employees with a spacious and comfortable working environment while offering ample support and motivation for the company's development. Starting from April 15, 2024, our office address will be changed to: [Unit 3104, Channel Pearl Plaza, No.99 Yilan Road, Siming District, 361008, Xiamen City, Fujian Province, China]。This relocation is not only a natural choice for the continued development of our company, but also a testament to our confidence and aspirations for the future. The utilization of the new premises will further enhance internal collaboration and communication within the company, ignite the creativity and vitality of our team, and elevate our efficiency and service standards. We aim to deliver even higher-quality products and services to our customers and partners as a result. Finally, we would like to express our heartfelt gratitude for your long-standing support and trust in our company. We believe that this new beginning will bring forth fresh hope and opportunities. We will continue to uphold the principle of 'Customer First, Innovative Development', striving for excellence and working towards our long-term corporate goals. Let us join hands and work together to create a brighter future.
A steam trap valve is a device designed on devices that require steam, which can automatically discharge condensate, air, and non condensable gases from the steam system and prevent steam from being discharged. Important Functions (1) Able to quickly remove condensate generated; (2) Prevent steam leakage; (3) Remove air and other non condensable gases. The necessity of using steam equipment to remove condensate and air: (1) Prevent water hammer: If there is condensate in the steam pipeline, it will be strongly impacted by the high-speed flowing steam on the pipe wall, valves, and steam equipment, causing damage or damage to the pipeline bends, valves, and steam equipment. (2) To prevent a decrease in the efficiency of steam using equipment: Steam using equipment (especially indirect heating devices) is aimed at effectively utilizing the latent heat of steam. Excessive condensate trapped in these devices comes into contact with the heating surface, reducing the heating area and uneven heating up and down, resulting in a significant decrease in equipment efficiency. (3) Prevent corrosion of steam inside equipment: Oxygen in water and air coming into contact with the equipment can cause chemical reactions, leading to rust corrosion. (4) Prevent damage to steam using equipment: Due to the different temperatures of steam and water, the condensed water inside the equipment generates temperature differences locally, causing temperature difference stress and equipment damage. Specific requirements for steam trap valves: (1) No steam leakage during the discharge of condensate; (2) It can eliminate all condensed water from any part of the steam system; (3) Capable of simultaneously discharging air and condensate; (4) Suitable for a wide range of pressures; (5) Easy to repair and maintain: simple structure with few moving parts; (6) High practicality: small size, light weight, long lifespan, low price, and no loss of emission capacity due to air and steam.
The 4 inch cryogenic ball valve, designed as per API609, has many parts equipped RPTFE --It has the lowest coefficient of friction and the best corrosion resistance of any known plastic material, so that the valve can handle quite extreme situations.
Payment:
30% T/T When Order, 70% T/T Before ShipmentProduct Origin:
ChinaColor:
CustomizationShipping Port:
Shanghai, ChinaLead Time:
30~60 days Ex Works after order confirmationMaterial:
F316Method of Operation:
LeverQuick Details
|
Type |
Ball Valve |
|
Nominal Diameter |
4" |
|
NominalPressure |
300LB |
|
Construction |
Bolted Weld, Extended Stem or Bonnet, Full Port |
|
Connection |
RF |
|
Operation |
Lever Operated |
|
Body Material |
F316 |
|
Design Code |
API 607 |
|
Pressure & Temp |
ASME B16.34 |
|
End toEnd Dimension |
ASME B16.10 |
|
Connection Size of Flanges |
ASME B16.5 |
|
Inspection |
API598 |
|
Temperature Range |
-196℃~+120℃ |
|
Media |
Oil, Water, Gas |
Design Feature
Extended stem and bonnet to position the stem packing above the cryogenic fluid and provide a column of warmer vapor that insulates the stem seal from the effects of low temperatures.
High-density seats and seals throughout the valve enable the valve to be rated down to -196°C service.
Vent hole is in the upstream face of the ball. This prevents the cold liquids from becoming trapped in the valve.
Stem primary seal and bearing are located near the packing end of the extended stem thus keeping these parts from the low temperatures and providing a blow-out proof stem design.
Valves are specially cleaned to remove all grease and oils that may react with the service media
Each valve after cleaning is packaged and sealed in a heavy poly bag to keep the valve clean until installation.
Technical Drawing
Our Service
Dervos customer service is one of our biggest competitive advantages. In Dervos, we provide-
1. Quotation within 24 hours or no later than 3 days
This will let you meet the quotation submission deadline and enhance your working efficiency
2. Weekly status report of your order
In this way, you will have a clear picture of your order. You do not need to waste time on pushing us for status update
3. An 18-month warranty period
A warranty certificate will issued after shipment and you will not have any concern after buying valves.
4. Solutions to complaints within 3 days
Quick and responsible actions to complaints will protect your reputation and reduce the financial loss as much as possible.
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
The Class 1500 4'' cryogenic ball valve is designed with extended stem for low temperature application. The valve is made of LF2 with fully welded body, butt weld end and gearbox operation. Design Feature -Fully welded & forged body -Extended stem or bonnet -Full port design and piggable -Anti blow-out stem -Antistatic function - Automatic cavity relief -Bi-directional seat and DBB design -With stem and seat grease fittings Quick Detail Type Ball Valve Size 4" Pressure ANSI 1500 Construction One-Piece Body, Fully Weld, Extended Stem or Bonnet, Full Port Connection Butt Weld Operation Gearbox Operated Body Material Low Temperature Steel A350 LF2 Design Code API 6D Pressure & Temp ASME B16.34 End to End Dimension ASME B16.10 End Connection ASME B16.25 Inspection API 598 Temperature Range -46℃~+200℃ Media Oil, Water, Gas Related Knowledge What is the difference between full bore and reduced bore ball valve? The internal diameter of a full bore ball valve is the same as the inner diameter of the pipe. The full bore ball valve has little resistance and pressure drop to the flow. Plus, the full bore ball valve is piggable. However, the internal diameter of a reduced port (standard port) ball valve is smaller than the inner pipe size. Flow restriction caused by the reduced port will cause a pressure drop. And sometimes a pig to clean the pipe will get stuck in the reduced port ball valve. Certificates Dervos could provide reports upon clients’ requests, such as ISO 9001, PED CE, EAC, API 607, API 6D, API 6A and etc.
8" 1500LB gate valve is made according to ASME B16.34 standard. The valve body is made of WCC. It has the structural characteristics of pressure self sealing, elastic gate and structural length of 711mm. The working principle of self sealing valve is mainly to use wedge sealing surface to seal under pressure.
High Pressure Check Valve Supplier in China Offers Pressure-Seal Bonnet Check Valve, ASTM A105N, 1 Inch, Class 1500 LB, Forged Steel Lift Check Valve.
Quick Detail Type Globe Valve Designed Size 3/4 Inch Designed Pressure 1500LB Construction Y Type; Bolted Bonnet; Connection Type Socked Weld Operation Handwheel Design Code API602 Connection ANSI B16.11 Test & Inspection API598 Body Material A182 F11+STL Trim Material A276-410+STL Application Water, Oil, Gas Features · Low pressure drop. · Low torque stroking · Quick and easy repair in line. · Tight shutoff. · Stem expansion/contraction thrust unit for high temperature application (optional). · Other sizes available on request. · Live-loading of packing optional. Technical Drawing Dimension Check Witnessing Tests Packing Product Application Dervos valves can be widely used in varieties of industries, such as petrochemical,pipeline,oil & gas,marine,water treatment,power station industries and etc.
The double- disc check valve, made of CF8 stainless steel, has excellent resistance to corrosion. Designed in accordance with DIN 3202, the check valve is about to connect to pipes with WAFER. Quick Detail Type Check Valve Nominal Diameter DN100 NominalPressure PN25 Construction Double disc/ Dual Plate Connection Wafer Type Design & Manufacture DIN 3202 End to End DIN 3202 Flange End Dimension DIN 2401 Test & Inspection API 598 Temperature Range -29℃~+425℃ Body Material A351 CF8 Wedge Material A351 CF8 Media W.O.G. Dervos Packaging Good packing means good first impression. Just imagine how do you feel differently when seeing two boxes below? And you will know the reason why in Dervos we value packaging so much. In Dervos, we make sure- 1. Every valve isclean and dry. What do we do? -Clean the valve before packing -Add anti-rust oil -Add flange cover 2. No damageto valves in delivery. How do we achieve this? -Fix the valve with iron wire -Separate the valve with soft material -Layer the valve with plywood 3. Strong box and clear shipping mark
The stainless steel knife gate valve is designed with DN800 PN6 flange end and gearbox operation. The soft seated knife gate valve has a unidirectional sealing. Quick Detail Type Gate Valve Size DN800 Design Pressure PN6 Construction Unidirectional, Soft Seated ConnectionType Flange End OperationType Gearbox Operated Body Material CF8M DiscMaterial SS316L StemMaterial SS316 SeatMaterial PTFE Design Code MSS SP81 Medium Water, Oil and Gas Origin China Dimension Checking Pressure Tesing
6" 150LB Y type strainer is made according to ASME B16.34 standard. The valve body is made of ASTM B148 C95800. It has the structural characteristics of bonnet with 1/2 "FNPT plug. Its connection mode is RF.
6" 150LB strainer is made according to ASME B16.34 standard. The valve body is made of ASTM A216 WCB. It has the structural characteristics of basket type. Its connection mode is RF.
10" 150LB butterfly valve is made according to API 609 standard. The valve body is made of GGG40. It has the structural characteristics of medium line type and lug type (threaded hole). Its connection mode is lug. And it has lever operation mode.
The single-disc check valve, made of CF8, has excellent resistance to corrosion. Designed in accordance with API594, the valve is of a WAFER type.
The swing type check valve, designed with PN40 RF flange, bolted cover, is made of cast steel 1.0619 and ss316 trim material. The full bore check valve can be manufactured per client's special requests. Quick Detail Type Non Return Valve ( Check Valve) Nominal Size DN 150 NominalPressure PN 40 Construction BB, Swing Type Disc, Exnternal Pin Connection Raised Face Flange Design & Manufacture DIN 3356 End to End EN 558 Connection EN 1092 Test & Inspection EN 12266 Body Material GS-C25 (1.0619) ApplicableTemp -29℃~+425℃ Media W.O.G. Material No Part Name Carbon steel to ASTM Alloy steel to ASTM Stainless steel to ASTM WCB LCB WC6 WC9 C5 CF8 CF8M CF3 CF3M 1 Body A216 WCB A350 LCB A217 WC6 A217 WC9 A217 C5 A351 CF8 A351 CF8M A351 CF3 A351 CF3M 2 Seat Ring A105 A350 LF2 A182 F11 A182 F22 A182 F5 A182 F304 A182 F316 A182 F304L A182 F316L 3 Disc nut A182 F304 A182 F304 A182 F316 A182 F304L A182 F316L 4 Disc washer A182 F304 A182 F304 A182 F316 A182 F304L A182 F316L 5 Disc A216 WCB A350 LCB A217 WC6 A217 WC9 A217 C5 A351 CF8 A351 CF8M A351 CF3 A351 CF3M 6 Hinge A216 WCB A350 LCB A217 WC6 A217 WC9 A217 C5 A351 CF8 A351 CF8M A351 CF3 A351 CF3M 7 Hinge pin A182 F304 A182 F304 A182 F316 A182 F304L A182 F316L 8 Yoke A216 WCB A350 LCB A217 WC6 A217 WC9 A217 C5 A351 CF8 A351 CF8M A351 CF3 A351 CF3M 9 Bonnet nut A194 2H A194 4 A194 7 A194 8 10 Bonnet bolt A193 B7 A193 L7 A193 B16 A193 B8 11 Gasket Stainless Steel Spiral Wound graphite or Stainless Steel Spiral Wound PTFE 12 Cover A216 WCB A350 LCB A217 WC6 A217 WC9 A217 C5 A351 CF8 A351 CF8M A351 CF3 A351 CF3M 13 Hook screw Steel 14 Name Plate Stainless steel or Aluminum 15 Rivet Stainless steel or Aluminum Other Material ( Alloy 20, ANSI 321, Monel Hastelloy, etc)are available on request Our Service A good customer service is as valuable as product itself. In Dervos, we will offer a full range of customer service to make you feel easy when doing business with us. Providing weekly production report When production begins, you will get production report weekly, so that you can have good command of product status and report to your customer at the meantime. Offering warranty of 18 months 18 months warranty period will be offered after shipment, no concern to purchase valve from Dervos. Providing solutions within 3-days for complaints All the complaints will be solved within 3 days, in this case, you can timely reply and solve problems for your customer, to relax them even when complaints happening.
The 20 inch metal seated ball valve is designed for high temperature application or application with solid particulate. The valve has welded body, RF flange connection, bare stem for actuators, belonging to trunnion mounted type. Quick Detail Type Ball Valve Size 20" Pressure ANSI 600 Construction Trunnion Type, One-Piece Body, Fully Welded, Metal to Metal Seat Connection Flanged Operation Bare Stem Body Material Forged Steel ASTM A105 Design Standard API 6D Pressure & Temp ASME B16.34 Face to Face Dimension ASME B16.10 End Connection ASME B16.5 Inspection API 598 Temperature Range -29℃~+200℃ Media Oil, Water, Gas Dimension CLASS 600 DN mm 50 65 80 100 150 200 250 300 350 400 450 500 NPS in 2 2.5 3 4 6 8 10 12 14 16 18 20 L (RF) mm 292 330 356 432 559 660 787 838 889 991 1092 1194 in 11.5 13 14 17 22 26 31 33 35 39 43 47 L1 (BW) mm 292 330 358 432 22 660 787 838 889 991 1092 1194 in 11.5 13 14 17 559 26 31 33 35 39 43 47 L2 (RTJ) mm 295 333 359 435 562 664 791 841 892 994 1095 1200 in 11.63 13.13 14.13 17.13 22.13 26.13 31.13 33.13 35 39.5 43.1 47.3 H mm 153 165 195 213 272 342 495 580 630 725 800 850 in 6.02 6.5 7.68 8.39 10.7 13.5 19.5 22.85 24.8 28.5 31.5 33.5 Do(W) mm 600 850 1250 1300 1500 *350 *350 *600 *600 *800 *800 *800 in 23.62 33.46 49.25 51.22 59 13.8 13.8 23.6 23.6 31.5 31.5 31.5 RF(Kg) 38 56 66 122 217 350 660 820 830 1160 1420 1650 BW(Kg) 31 51 58 117 200 327 605 790 800 1030 1305 1505 *Worm Gear or Electric actuator operated Related Knowledge When to use metal seated ball valve? The seat of a metal seated ball valve is often stellite, stainless steel, or tungsten carbide instead of soft seat material like ptfe, peek, nylon, teflon, and devlon. These metal to metal seat ball valves are especially applicable for: -Media with high temperature -Media with solid particulate for high abrasion -Media with severe condition, like high erosion and corrosion -Media with high viscosity like heavy oil Our Main Product Range Dervos main products include ball valves, butterfly valves, check valves, gate valves, globe valves, and plug valves in different materials, sizes, standards and types as per clients’ requests.
Copyright © 2015-2024 DERVOS VALVE CO.,LTD.All Rights Reserved Blog / Sitemap / XML / Privacy Policy
