-
Most of ball valves own the sealant injection system. In this article, we will explain why ball valve is installed with sealant injection fittings. Generally speaking, each ball valve has two sealant injection fittings. One is located at the stem area and the other seat area, like the picture shown below. The sealant injection system of ball valve plays a part as the emergency sealing or backup se...
View More
-
If the medium remained in the cavity after the cryogenic gate valve is closed, the residue will gradually absorb the heat in the air and re-gasify. After the gasification, it will expand violently up to 600 times and generate extremely high pressure on the valve, which is called 'abnormal boost'. When the unusual occurrence happens, the wedge will be pressed firmly onto the seat and can’t be opene...
View More
-
Bronze and brass are two of the most common materials used to produce valves. This preference comes because both metals are quite malleable. They both are artificially made from natural metallurgical elements: brass is made from copper and zinc, while another is made primarily from copper and tin. Each metal offers valves numerous and various advantages...
View More
-
There are four common types of plug valves, each of which has specific characteristics and advantages. Lubricated plug valve The lubrication plug valve uses lubricant to reduce frictions and make each port tightly sealed. Lubricants are basicly base oils that increase the viscosity of moving parts, such as amorphous or fumed silica, which are injected between the valve plug surface and the valve b...
View More
-
As winter approaches, the temperature gradually drops and the valves outsides are getting greater chance tobe froze. At this time, the pipeline will easily fail if not take some acts. And when it comes to some high-risk working conditions, accidents may also occur. Therefore, the anti-freezing treatment of valves is crucial to industrial equipment. Before th...
View More
-
The V-type ball valve is a single-seat ball valve with a metal seat. The adjustment performance is the best in the ball valves, whose flow characteristics are equal percentages, and the adjustable ratio is up to 100:1. It has a shearing action between the V-shaped slit and the metal seat, and is especially suitable for media containing fibers, tiny solid particles, and slurry. During the...
View More