-
Most of ball valves own the sealant injection system. In this article, we will explain why ball valve is installed with sealant injection fittings. Generally speaking, each ball valve has two sealant injection fittings. One is located at the stem area and the other seat area, like the picture shown below. The sealant injection system of ball valve plays a part as the emergency sealing or backup se...
View More
-
For high-pressure piping systems where multiple pumps are used together, the problem of water hammer in the piping system is even more acute. Water hammer is a pressure wave of the ever-changing flow in a pressure pipe, which is a hydraulic shock caused by a pressure rise or fall due to the change in the fluid flow rate in the pressure pipe. Water hammer is the combined result of the inc...
View More
-
As winter approaches, the temperature gradually drops and the valves outsides are getting greater chance tobe froze. At this time, the pipeline will easily fail if not take some acts. And when it comes to some high-risk working conditions, accidents may also occur. Therefore, the anti-freezing treatment of valves is crucial to industrial equipment. Before th...
View More
-
What is the difference between a forged steel ball valve and a cast steel ball valve? The difference mainly lies in the processing technology and processing method of steel: A cast steel ball valves is a kind of ball valve that is formed by pouring liquids into a mold and then allowing them to solidify. Alloy steel is the most common casting material. Cast steel is divided into cast carbon st...
View More
-
The working principle of the forged steel ball valve is to make the valve unblocked or blocked by rotating the valve stem. The ball valve is easy to switch, small in size, can be made into a large diameter, reliable in sealing, simple in structure, convenient in maintenance, and the sealing surface and spherical surface are often in a closed state, which is not easy to be eroded by the medium, and...
View More
-
(1) Selection principle of valves for water supply pipelines 1. When the diameter of the pipeline is less than 50mm, a globe valve should be used; When the pipeline diameter is greater than 50mm, gate or butterfly valves should be used; 2. When it is necessary to adjust the flow and water pressure, regulating valves and globe valves should be used; 3. For parts with low water flow resistance (such...
View More
