-
The differences between butterfly check valves and swing check valves lie not only in their structural design but also in their typical applications. Although both valve types share the same functions—preventing backflow, enabling light-load pump starting, and reducing water hammer—their design characteristics and operational ranges differ. Both valve types feature a disc-shaped...
View More
-
1. What Is a Valve Welding Electrode? A valve welding electrode refers to a category of welding consumables specifically used for hardfacing, repair welding, and overlay welding of valve components, including the valve body, sealing surfaces (such as valve seats and valve discs), as well as welding joints between valves and pipelines. It is not a single product, but rather a general ...
View More
-
A ball valve is a widely used fluid control valve in industrial applications. A ball valve with a balance hole is a special design that offers distinct functional characteristics and is suitable for specific operating conditions. This article provides a comprehensive introduction to ball valves equipped with balance holes. 1. Structure of Ball Valves with Balance Holes Compared with standar...
View More
-
I. Improvement of Corrosion Resistance Resistance to Medium Corrosion: In various operating environments, valves are exposed to different media such as acids, alkalis, salt solutions, and corrosive gases. These media may corrode the metal surface of the valve, thereby reducing its service life. Electroplating a layer of corrosion-resistant metal or alloy—such as chromium, nickel, or zinc&mda...
View More
-
A gate valve is widely used for full open or full close flow control in pipeline systems. If a gate valve goes bad, then problems such as leakage, jamming, or operating failure will occur, directly affecting system safety and efficiency. Most gate valve failures develop gradually. If routine maintenance is ignored, then failure risk will increase significantly. Sealing Failure If the...
View More
-
In seawater piping systems, globe valves can be used to control and isolate fluid flow, provided that the materials and corrosion protection design are suitable for seawater service conditions. Seawater contains a high concentration of chloride ions and dissolved oxygen. If the valve material is not properly selected, corrosion can occur rapidly. Therefore, when globe valves are used in sea...
View More
