-
Stainless steel valve is made of stainless steel and has a handle, turbine, pneumatic, electric and other transmission structures. It is flexible and light to switch, compact in structure, light in weight, easy to heat preservation, easy to install, and has excellent sealing performance and corrosion resistance. Connection methods include welding, thread, flange, etc. Stainless steel valves are wi...
View More
-
With the advancement of valve technology, there are more and more types of valves. Globe valves are also used a lot of valves, and high pressure casting globe valves are the product of technological progress. Next, Dervos will give you a detailed introduction to the high pressure casting globe valve. Structural Features 1. The series of cast steel globe valves have reasonable structural design, st...
View More
-
The globe valve is a valve that uses the valve stem to lift and drive the valve head, thereby changing the distance between the valve disc and the valve seat to achieve opening and closing control. The globe valve is the most widely used cut-off valve in chemical production. Globe valves are mainly used for the control of water, steam, compressed air and other pipelines in actual production, but t...
View More
-
Overview Ultra-low temperature butterfly valves are mainly used in pipeline systems of liquefied natural gas and liquid nitrogen to control the opening and closing or adjustment of the pipeline equipment. The product adopts a double offset structure and an elastic metal sealing structure. The double offset structure can greatly eliminate unnecessary overloading and scraping of the disc and sealing...
View More
-
1. Selection instructions for gate valve In general, gate valves should be preferred. Gate valves are not only suitable for media such as steam and oil, but also for media containing granular solids and high viscosity, and are suitable for valves in venting and low vacuum systems. For media containing solid particles, the gate valve body should have one or two purge holes. For low-temperature medi...
View More
-
Working principle of globe valves Assuming there is a water supply pipeline with a cover, water is injected from the bottom of the pipeline and discharged towards the direction of the pipe mouth, and the cover of the outlet pipe mouth is equivalent to the closing part of the globe valve. If you lift the pipe cover up with your hand, the water will be discharged outward. If you cover the pipe cover...
View More