Market competition in China's valve industry is becoming increasingly fierce. Market analysts believe that there are four trends in the valve industry.   First, the engineering energy-saving valve Development of large, small and new series, such as small valves, large valves and actuated valves. The development of variable speed products such as wetland, wetland, desert, scrub, high temperature and high pressure, low temperature and low pressure valves as well as heavy and light duty valves. Development of multi-functional, multi-functional products, multi-functional valves, energy efficient. Promising products include large valve wheels, mechatronic regulators, high-power crawler gates, new crawler ball valve series, and small butterfly valves.   Second, multi-functional hydraulic control valve Development of high-performance hydraulic control valve, such as discharge, high sensitivity, corrosion resistance, friction resistance, zero leakage, hydraulic control valve, development of integrated technology, computer technology, hydraulic control valve, high level of monitoring technology, good development of operational reliability, high safety, good products.   Three, for remote control of intelligent power regulator In order to develop high performance large regulators for large projects in China, the development of miniature regulators is required for trenching, buried cables, etc. In order to adapt to the development of power stations, oil, coal, water conservancy, agricultural fields, urban construction and other narrow operational needs of the new species of Control valves; development in a variety of operating conditions in the valve operator can monitor, control and improve the operating conditions of intelligent electronically controlled valves. Promising products are large and medium-sized intelligent electronic control valves, miniature intelligent electronic control valves, remote control type intelligent electronic control valves.   Fourth, the valve industry aimed at generalization We develop advanced products with high safety, high reliability and good performance, and develop advanced electronic integration technology with large electronic valves, and develop products that are versatile, standardized and serialized.  

1. Gate valves are usually put in on-off occasions and they are forbidden to be used to regulate the flow.   2. It is suggested to use gate valve with flexible or split wedge when the application scenarios are above 260℃, in that way stuck could be avoided out of thermal expansion.   3. When it comes to high velocity (turbulent) or thermal cycling, the threaded seat must be welded with the valve body. Please specify that when ordering.   4. After the gate valve is closed, you should reverse the stem for around 1/8 to 1/4 turn to relieve the pressure of the stem. This prevents the valve from impeding or damage even if the stem slightly expand in use.   5. Due to the different caliber size, application environment, and materials, certain gate valves require special installation. If the valve you order must be specially installed, you should indicate the direction of the valve when ordering.

The diameter of the butterfly valve is mainly determined by the flow, medium and flow rate. In general, the flow rate of liquid is not more than 5m/s and up to 7-8m/s. In general, the flow rate of water is 2-3m/s, the flow rate of low pressure gas is recommended for 2-10m/s, the flow rate of medium pressure gas is recommended for 10-20m/s; As for the flow rate of steam, the flow rate of low pressure steam is recommended for 20-40m/s, the flow rate of medium pressure steam is 40-60m/s, and the flow rate of high pressure steam is 60-80m/s.   Of course, sometimes, in order to reduce pressure loss, people will choose a larger diameter butterfly valve, so the flow rate will be slower. However, this cannot be done if the valve is operating with a low flow rate.   Liquids flow through a zone of absolute low pressure and undergo rapid evaporation and re-condensation in a very short period of time. This phenomenon is called cavitation effect. Because the gas cannot change state at low pressure, this phenomenon does not occur in the gas stream. When the fluid flows into the high-pressure area, the steam bubbles will suddenly condense, collapse or coalesce, the flow rate can reach 110m/s, the flow pressure can reach 50Mpa, causing impact damage to the pipe wall.   When the valve pressure is less than 1.5Mpa and cavitation occurs, but does not cause serious damage to the material, so no special measures are necessary.

Dervos Valve Industry Company Limited is about to attend Valve World Expo 2016 and the exhibition position is Hall 4 / G59. We look forward to your arrival and hope there ‘s cooperation in the future. If you are interested in our products, please call Tel: 0086-592-5185 336 or email us through: inquiry@dervosvalve.com. DERVOS is a professional exporter of industrial valves which was founded in 2008. The professional sales and service team started the business in valves from then on and has expanded the markets to 5 continents: Europe, Asia, America, Africa, and Oceania. Valve World Expo, the international trade fair and convention for industrial valves and fittings, is a biennial event that has been held in Düsseldorf since 2010.   In all, 12,500 trade visitors came to Düsseldorf on the three days of the trade show. By that time, we will also bring our latest researches and products to the exhibition. Hope to meet you there.   Exhibition: Valve World Expo 2016 (10th Biennial Valve World Conference & Exhibition) Date: 29 Nov-1 Dec, 2016 Organizer: Messe Düsseldorf GmbH Address: Düsseldorf, Germany International Exhibition Centre Company exhibition position: Hall 4 / G59

Thanks to the development of today’s science and technology, the marine valves have been greatly improved, with better body strength, strong resistance to abrasion and corrosion and longer service life. Occasionally, however, some unexpected faults would affect the use and health of the valve. How are some common faults and relevant ways to fix it.   1. The device doesn’t work and DCS alarms timeout Possible causes: A. The power dead; B. The main loop lacks of phase; C. The control loop fails;   Solutions: A. Check the power supplier and voltage of each circuit; B. Check if the main circuit phase wire is broke; C. Check if the switch limited position or the torque switch works normally. Whether the DCS is protected by chain;   2.DCS alarms once upon it is operated Possible causes: A. The short-circuit of the main circuit leads to the protective act of the thermal relay or power switch trip; B. Fails of internal components or body cause excessive torque protection; C. The electrical equipment's torque control mechanism fails or the torque setting value is too small;   Solutions: A. Check whether the power switch trip and thermal relay ; B. Check if the transmission mechanism is stuck; C. Check the torque setting value;   Through the above analysis, we will have a general understanding of these failures and the corresponding solutions. There will be other faults in marine valves in the future, but as long as we actively analyze these faults, we will finally find a suitable solution.

1. First of all, the design of the safety valve must meet the requests from users. 2. The price of the product should be the most reasonable once upon the actual working condition. 3. The first though design should have in their mind is that making the overall performance of the valve reach the anticipation and standards. 4. More tests promise more precise and detailed parameters. 5. The spring’s stiffness should be paid more attention. Appropriate design enables the valve’s internal parts to match each other batter, making it easy to assemble, disassemble and maintain. 6.Safety valve needs to be designed to have a longer service life. Generally, the medium of safety valve can be divided into three types: steam, gas and liquid. But designers cannot do performance tests of various media at the same time. Due to heavy oil (asphalt) and other media, the qualified performance data obtained from the cold test may become unsatisfactory. Therefore, the safety valve design cannot duplicate any other mature product models. The valve should be manufactured with appropriate spring rigidity and reasonable internal structure according to different media. Of course, the design principle of the safety valve is to produce products that users satisfy, and the only design shortcut is the experience accumulated from practice.