A steam trap valve is a device designed on devices that require steam, which can automatically discharge condensate, air, and non condensable gases from the steam system and prevent steam from being discharged. Important Functions (1) Able to quickly remove condensate generated; (2) Prevent steam leakage; (3) Remove air and other non condensable gases. The necessity of using steam equipment to remove condensate and air: (1) Prevent water hammer: If there is condensate in the steam pipeline, it will be strongly impacted by the high-speed flowing steam on the pipe wall, valves, and steam equipment, causing damage or damage to the pipeline bends, valves, and steam equipment. (2) To prevent a decrease in the efficiency of steam using equipment: Steam using equipment (especially indirect heating devices) is aimed at effectively utilizing the latent heat of steam. Excessive condensate trapped in these devices comes into contact with the heating surface, reducing the heating area and uneven heating up and down, resulting in a significant decrease in equipment efficiency. (3) Prevent corrosion of steam inside equipment: Oxygen in water and air coming into contact with the equipment can cause chemical reactions, leading to rust corrosion. (4) Prevent damage to steam using equipment: Due to the different temperatures of steam and water, the condensed water inside the equipment generates temperature differences locally, causing temperature difference stress and equipment damage. Specific requirements for steam trap valves: (1) No steam leakage during the discharge of condensate; (2) It can eliminate all condensed water from any part of the steam system; (3) Capable of simultaneously discharging air and condensate; (4) Suitable for a wide range of pressures; (5) Easy to repair and maintain: simple structure with few moving parts; (6) High practicality: small size, light weight, long lifespan, low price, and no loss of emission capacity due to air and steam.
In industrial production, high-pressure ball valves play a crucial role, and damage to the sealing surface may lead to leakage and performance degradation. Therefore, measures must be taken to prevent and protect the sealing surface. 1. Proper Operation and Usage When operating high-pressure ball valves, it is essential to follow the correct operating procedures and technical requirements. Do not exceed the rated pressure and temperature range of the valve. Avoid over-tightening the valve to prevent damage to the sealing surface or premature wear. 2. Regular Inspection and Maintenance Regularly inspect the sealing surface of the ball valve, especially valves exposed to high-pressure and high-temperature environments. Remove any debris and dirt around the valve to ensure the sealing surface is in good working condition. 3. Select Appropriate Sealing Materials Choose suitable sealing materials according to the requirements of the working environment. For instance, in high-temperature or chemically corrosive environments, select sealing materials that are resistant to high temperatures and corrosion. Regularly inspect the wear and aging of sealing materials and promptly replace damaged seals. 4. Preventing Foreign Object Intrusion Install filters or screens to prevent foreign objects from entering the valve body and damaging the sealing surface. Avoid conducting messy operations around high-pressure ball valves to reduce the intrusion of external impurities. 5. Timely Repair and Replacement If damage or wear is found on the sealing surface, stop using it immediately and proceed with repairing or replacing the seals to prevent leaks from causing more serious issues. 6. Training and Education Provide training to operators to ensure they understand the working principles and proper operation methods of high-pressure ball valves, reducing the risk of seal surface damage due to operational errors. 7. Minimize Frequent Opening and Closing Reduce the frequency of opening and closing high-pressure ball valves because frequent operation increases wear and fatigue on the sealing surface, leading to premature failure. Where possible, take measures to minimize valve cycling, such as planning production schedules rationally or employing automated control systems. 8. Regular Cleaning and Maintenance Perform regular cleaning and maintenance on high-pressure ball valves to remove accumulated dirt and deposits inside the valve body, ensuring the valve operates smoothly and the sealing surface remains clean. Regular cleaning effectively reduces contamination and corrosion of the sealing surface, extending the lifespan of the seals. 9. Choose High-Quality Ball Valves Select high-quality high-pressure ball valve products to ensure that the design and manufacturing quality of the valves meet standard requirements and possess excellent performance and reliable sealing capabilities. Valves from DERVOS typically offer longer lifespan and better sealing effects, effectively...
Stainless steel trunnion mounted ball valve is a commonly used valve type, usually used to control the flow of fluids (such as water, gas, steam, etc.) in pipelines. Advantages: 1. High-pressure resistance. 2. Corrosion resistance due to stainless steel material. 3. Excellent sealing performance with advanced sealing technology. 4. Using PEEK valve seats, zero leakage, and light torque. 5. Robust structure for high reliability. 6. Convenient operation, including remote control, enhancing system efficiency. 7. Wide applicability across industries such as petroleum, chemical, natural gas, and metallurgy. Stainless steel trunnion mounted ball valve is a reliable valve type suitable for various industrial scenarios, especially in environments that require corrosion resistance and high temperature resistance accompanied by corrosion.
Payment:
30% T/T When Order, 70% T/T Before ShipmentProduct Origin:
ChinaColor:
CustomizationShipping Port:
Shanghai, ChinaLead Time:
35~60 days Ex Works After Order ConfirmationMaterial:
WCB
With the RF flange connection, the 2 inch tilting disc check valve is designed as per API 6D and made of carbon steel. It is suitable for the medium pressure up to 300 LB and temperature between minus 29 and 425 Celsius degree.
Quick Detail
|
Type |
Check Valve ( Non-return Valve) |
|
Nominal Diameter |
2’’ |
|
NominalPressure |
300LB |
|
Construction |
Tilting Type Disc |
|
Connection |
RF Flange |
|
Design & Manufacture |
API 6D，BS1868 |
|
End to End |
ASME B16.10 |
|
Flange End Dimension |
ASME B16.5 |
|
Test & Inspection |
API 598 |
|
Temperature Range |
-29℃~+425℃ |
|
Body Material |
Carbon Steel |
|
Media |
W.O.G. |
Technical Drawing
Our Main Product Range
With a complete product range, Dervos product lists cover gate, globe, check, ball, butterfly, check, plug valve and strainers. We can also provide marine valve, pressure reducing valve, control globe valve, wellhead valve and so on.
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
The 12 inch high pressure check valve is designed with pressure seal bonnet, RTJ flange, tilting disc, made of carbon steel WCB body and hard face sealing. Quick Detail Type Check Valve Size 12'' DesignPressure 2500LB Construction Pressure Seal Bonnet, Tilting Disc Type Connection RTJ Flange Design & Manufacture ASME B16.34 End to End ASME B16.10 Connection ASME B16.5 Pressure & Temp ASME B16.34 Test & Inspection API 598 Body Material A216 WCB Trim Material 13CR+STL Temp Range -29℃~+350℃ Media W.O.G. Product Range Body Material Range: WCB, WCC, WC1,CF8M, CF8, CF3, CF3M, LCB, LCC Size Range: 2”~60” (DN50~DN1500) End Connection Type: Flange End, Weld End Design Pressure Range: 150lbs~600lbs Temp Range: -46℃~ +425℃ Related Knowledge What is a tilting disc check valve? The disc of a tilting disc check valve has a pivot point at the center of it. It is desinged to overcome weaknesses of general type swing check valve. Compared to swing type check valve, the tilting check valve could remain fully open and steady at lower flow rates. That is to say, the swing check valve needs a high velocity of fluid to keep disc open and a higher cracking pressure. For low pressure situation, the pressure drop of a tilting disc check valve is much lower than the swing type. But at a higher flow rate, the tilting check valve has higher pressure drop than swing type.
DN250 PN10 check valve body is made of A216 WCB+STL. It has the structural characteristics of heavy hammer on both sides and flange type. Its connection mode is RF.
DN400 PN16 gate valve is made according to EN1984 standard. The valve body is made of 1.0619 + STL. It has the structural characteristics of rising stem and structural length of 600mm.
The 1 inch self-lubricated or non-lubricated plug valve is made of A315 CF3 as per API 599. It enjoys outstanding sealing and anti-corrosion performance, owing to its PTFE seat. Besides that, the sleeve type valve is only suitable for the normal temperature up to 120 degree. Quick Detail Type Plug Valve Size 1'' Design Pressure 150LB Construction Self-Lubricated Type, Sleeved Type, Soft Seat Connection Flange Operation Lever Operation Design Code API 599 Face to Face ASME B16.10 End Connection ASME B16.5 Test & Inspection API 598 Body Material A351 CF3 Temperature Range -29℃~+120℃ Application Water, Oil, Gas Dimension Checking Hydro-static Testing
The 8 inch non return check valve conforms to BS 1868 design code, with bolted bonnet and swing type disc. The flanged check valve is made of carbon steel A216 WCB. Design Feature 1.BB: bolted bonnet 2.Swing type disc 3.Reduced bore design 4.Superior flow rates 5.Minimized friction loss 6.Standard trim material for selection 7.External or internal hinge pin available on request 8.Cylinder and counter weight available on request 9.Bare stem and actuators are available on request Quick Detail Type Check Valve Size 8'' Design Pressure ANSI 1500 Construction Bolted Bonnet, Swing Type Connection Raised Face Flange Design & Manufacture BS 1868 End to End ASME B16.10 Connection ASME B16.5 Pressure & Temp ASME B16.34 Test & Inspection API 598 Body Material Carbon Steel Applicable Temp -29℃~+400℃ Media W.O.G. Dimension Class 1500 NPS in 2 2 1/2 3 4 6 8 10 12 DN mm 50 65 80 100 150 200 250 300 L-L1 (RF-BW) in 14-1/2 16-1/2 18-1/2 21-1/2 27-3/4 32-3/4 39 44-1/2 mm 368 419 470 546 705 832 991 1130 L2 (RTJ) in 14-5/8 16-5/8 18-5/8 21-5/8 28 33-1/8 39-3/8 45-1/8 mm 371 422 473 549 700 841 1000 1146 H (OPEN) in 12-1/4 12-1/4 13 14 15-3/4 20-7/8 22-1/16 25-5/8 mm 310 310 330 355 400 530 560 650 WT (kg) RF 69 93 140 232 490 990 1490 1970 BW 49 74 111 185 375 803 1250 1625
DN20 800LB PN130 Forged Steel A105 SW Connection Way BB OS&Y Handwheel Operation Gate Valve Body and Bonnet A105 API600 Trim 8 Seat 410+STL Wedge 420 Stem 410 Gasket 304+Graphite Design and Manufacture API602 Face to Face ANSI B16.11 Welded end Dimensions API 602 Test and Inspection API 508. Quick Detail Type Gate Valve Size DN20 Pressure 800LB Construction BB,OS&Y Connection SW Operation Mode Handwheel Body Material A105 Cover A105 Design & Manufacture API 602 End Connection API 602 Inspection API 598 Temperature Range -29℃~+425℃ Medium Oil, Water, Gas
The DN65 PN16 angle type globe valve is made of cast steel 1.0619 body and ss304 trim material, with rising stem, handwheel, RF flange. Quick Detail Type Globe Valve Norminal Size DN 65 NorminalPressure PN 16 Construction Angle Pattern, BB ConnectionType Flanged Operation Handwheel Design Code DIN 3356 Face to Face EN 558 Connection EN1092 Test & Inspection EN12266 Body Material GS-C25 (1.0619) ApplicableTemp -29℃~+425℃ Application WOG Related Knowledge Why use an angle type globe valve? Angle globe valve turns the flow direction by 90 degrees without using an elbow or the extra pipe weld, which reduce the number of joints on the pipeline, save the installation time, and reduce the pressure drop & flow resistance. The angle pattern globe valve are used for application with periods of pulsating flow, since they are able to handle slugging effect. Our Main Product Range As an experienced supplier and vendor of industrial valves, Dervos supply cast steel valve, forged steel valve, cast iron valve, stainless steel valve, bronze valve, brass valve and alloy steel valve and so on, suitable for sea water, water, oil, and gas application.
The swing type check valve, designed with PN40 RF flange, bolted cover, is made of cast steel 1.0619 and ss316 trim material. The full bore check valve can be manufactured per client's special requests. Quick Detail Type Non Return Valve ( Check Valve) Nominal Size DN 150 NominalPressure PN 40 Construction BB, Swing Type Disc, Exnternal Pin Connection Raised Face Flange Design & Manufacture DIN 3356 End to End EN 558 Connection EN 1092 Test & Inspection EN 12266 Body Material GS-C25 (1.0619) ApplicableTemp -29℃~+425℃ Media W.O.G. Material No Part Name Carbon steel to ASTM Alloy steel to ASTM Stainless steel to ASTM WCB LCB WC6 WC9 C5 CF8 CF8M CF3 CF3M 1 Body A216 WCB A350 LCB A217 WC6 A217 WC9 A217 C5 A351 CF8 A351 CF8M A351 CF3 A351 CF3M 2 Seat Ring A105 A350 LF2 A182 F11 A182 F22 A182 F5 A182 F304 A182 F316 A182 F304L A182 F316L 3 Disc nut A182 F304 A182 F304 A182 F316 A182 F304L A182 F316L 4 Disc washer A182 F304 A182 F304 A182 F316 A182 F304L A182 F316L 5 Disc A216 WCB A350 LCB A217 WC6 A217 WC9 A217 C5 A351 CF8 A351 CF8M A351 CF3 A351 CF3M 6 Hinge A216 WCB A350 LCB A217 WC6 A217 WC9 A217 C5 A351 CF8 A351 CF8M A351 CF3 A351 CF3M 7 Hinge pin A182 F304 A182 F304 A182 F316 A182 F304L A182 F316L 8 Yoke A216 WCB A350 LCB A217 WC6 A217 WC9 A217 C5 A351 CF8 A351 CF8M A351 CF3 A351 CF3M 9 Bonnet nut A194 2H A194 4 A194 7 A194 8 10 Bonnet bolt A193 B7 A193 L7 A193 B16 A193 B8 11 Gasket Stainless Steel Spiral Wound graphite or Stainless Steel Spiral Wound PTFE 12 Cover A216 WCB A350 LCB A217 WC6 A217 WC9 A217 C5 A351 CF8 A351 CF8M A351 CF3 A351 CF3M 13 Hook screw Steel 14 Name Plate Stainless steel or Aluminum 15 Rivet Stainless steel or Aluminum Other Material ( Alloy 20, ANSI 321, Monel Hastelloy, etc)are available on request Our Service A good customer service is as valuable as product itself. In Dervos, we will offer a full range of customer service to make you feel easy when doing business with us. Providing weekly production report When production begins, you will get production report weekly, so that you can have good command of product status and report to your customer at the meantime. Offering warranty of 18 months 18 months warranty period will be offered after shipment, no concern to purchase valve from Dervos. Providing solutions within 3-days for complaints All the complaints will be solved within 3 days, in this case, you can timely reply and solve problems for your customer, to relax them even when complaints happening.
The PN10 DN200 double offset butterfly valve collects durable body and an easy replaceable seat for control services the power, chemical, petrochemical and other fields.
The high performance butterfly valve is designed with double eccentric or double offset structure. The valve has cast steel WCB body, stainless steel disc and stem along with RPTFE soft seat. Quick Detail Type Butterfly Valve Nominal Size 6 Inch Nominal Pressure Class 150 Structure Double Offset, Double Eccentric, Soft Seat Connection Type Lug Type Operation Gear Operated Design Code API 609 Face to Face ASME B16.10 End Connection ASME 16.5 Test & Inspection API 598 Body Material Cast Steel WCB Trim Material CF8M Disc, 17-4PH Stem, RPTFE Seat Application Water, Oil, Gas Dervos Inspection Report
The DN150 PN10 unidirectional knife gate valve features a single piece, stainless steel body design provides tested performance in applications ranging from general purpose to severe media.
The DN100 safety valve, made of WCB and according to GB/T12241-2005, usually work as the over-pressure protection device that work under a steam, air, water or other non-corrosive medium.
Copyright © 2015-2024 DERVOS VALVE CO.,LTD.All Rights Reserved Blog / Sitemap / XML / Privacy Policy
